|
|
 |
|
Parts for Kent, Day, Lehmann, & Other Mills
|
- Keith Machinery manufactures parts for all mills. These parts are designed using AutoCAD, and they are machined on our various CNC machine tools. Standard parts are kept in stock, and they can normally be shipped next day. These parts include endplates and endplate holding assemblies; hand wheel assemblies including hand wheels, stem pinions, etc... silent chain drives including roll gears and motor pinions, aprons, etc...
|
|
Parts for Anthony Three Roll Mills
|
- Keith Machinery (KMC) manufactures three basic designs of Anthony three roll mills. The first design type is the 2.5” x 5” mill. The second design type covers 4”x8”, 5”x12”, and 6”x14” mills. The third design covers 8”x20”, 9”x24”, and 13”x32”.
When you look at one of the expanded parts drawings in this section, the part number will show a design number of say 008. This design number (for Anthony 4”x8”, 5”x12”, and 6”x14” mills) always refers to the mill apron. The actual part number for a 5”x12” mill would be A512-008. The actual part number for a 6”x14” mill would be A614-008.
In order to view the actual expanded parts drawing for your mill, please click on the appropriate mill design type below:
- Drawings for 2.5” x 5” mills:
- Expanded parts drawing for Anthony 2.5”x5” mills (view).
- Drawings for 4”x8”, 5”x12”, and 6”x14” mills:
- Overall drawing of mill with manual roll set (view).
- Overall drawing of mill with manual-hydraulic roll set (view).
- Overall drawing of mill with electro-hydraulic roll set (view).
- Expanded drawing for all mills (view).
- Drawings for 8”x20”, 9”x24”, and 13”x32” mills:
- Overall drawing of mill with manual roll set (view).
- Overall drawing for mill with electro-hydraulic roll set (view).
- Expanded drawing for all mills (view).
|
|
|
The material on this site is protected under the copyright laws of the United States of America and international conventions, and is the exclusive property of Keith Machinery Corp. or any licensee. All rights reserved. © Keith Machinery Corp. 2003-2008.
|
Site by Webline Designs. |
|
|
