|
|
 |
|
Roll Set Switch Program for Production Three roll Mills
|
Keith Machinery offers a "ROLL SET SWITCH" program for users of Production Size Three Roll Mills. With this program, the mill will normally be down less than four (4) days total, and obviously this is a very great benefit. Also, if your plant has a number of identical mills, an original roll set switch allows us to rework each of the mills in turn, with no mill being out of operation for more than four days.
With this program, the customer receives a fully remanufactured roll set. The roll set will include rolls, gears, six (6) new bearings, new endplates and new water pipes. Once the roll set arrives at his factory, the old roll set must be removed from the mill, and the new roll installed. This work can either be accomplished using a Keith Machinery Service Team, or the switch can be made with "in house" employees.
We believe that this program is worth considering if you have a Production Mill, which requires rebuilding. Please inquire for pricing.
Notes:
- Small Production Mills are 8"X20", 9"X24", 1O"X22", etc.; Mid Production Mills are 12"X30", 13"X32", 1 4"X30, etc.; Large Production Mills are 16"X36", 1 6"X40", etc.
- Keith Machinery will endeavor to use a roll set with roll diameters close to those of the roll set to be removed. There will be a Roll Size Adjustment to either charge or credit the customer for any differences in roll diameters. The adjustment is figured on the unground roll diameters, please inquire for standard pricing.
- The customer is responsible for round trip freight.
- When the replaced roll set arrives back in Lindenhurst, the roll set will be thoroughly inspected to insure that it is complete and that all parts are repairable. KMC will charge back for any items that would not be part of our standard Roll Set Job Program. As an example, if the endplates are not big enough to remanufacture then the customer is charged for a new set of end plates.
Keith Machinery also maintains a stock of remanufactured aprons, which are used for "apron switches". Please inquire as to pricing.
BACK
|
|
|
The material on this site is protected under the copyright laws of the United States of America and international conventions, and is the exclusive property of Keith Machinery Corp. or any licensee. All rights reserved. © Keith Machinery Corp. 2003-2008.
|
Site by Webline Designs. |
|
|
