Details
- 15", 19" or 24" pan (Qty (1) 24" pan included; others at added cost).
- Pan RPM 3-30; VFD control of process and exhaust blowers (Mitsubishi VFD's)
- Process air temp (typical) to 85 degrees C via set point control
- Air bypass, HEPA, air balancing controls, spray totalizer, data acquisition port, compu-coat control, instrumentation and display are all standard features
- The unit has a self-contained Graco Spray System described above
- Manual included
- Unit has a data acquisition port which can be hooked up to a data acquisition system.
-All Compu-Lab's are equipped with a 37 pin Amphenol® connector. Traditionally, this connector mated with a 12 channel strip chart recorder. A company such as AutoSoft offers (at additional cost) electronic enclosure to replace the strip chart recorder. The following parameters can be measured: Pan Load Delta-P, FPM (CFM), Exhaust Dew Point, Inlet Temperature, Exhaust Temperature, Atom. Air Pressure, Inlet Dew Point, Solution Flow, Pan/Room, Delta-P, Pan RPM.
SELLING PRICE, AS IS, WHERE IS, LINDENHURST, NY...$85,000
Contact Information
If you need further assistance, please contact our sales department at 631-957-1200 or by email at sales@keithmachinery.com.
Payment & Shipping Information
Company Checks, Certified Checks, Credit Cards and Wire Transfer. Please note that Credit Card payments will incur a 2.5% processing fee. Please note all equipment will not ship until all funds have cleared. Financing is available for the above equipment. Terms available are for 24-72 month payment plans, with a variety of buy-out options. Should you wish to explore this leasing option, please contact our Corporate Headquarters at (631) 957-1200.
All equipment is sold "as is, where is". Buyer is responsible for all skidding, crating and shipping charges.
Disclaimer
The information on this website is correct to the best of our knowledge; however, Keith Machinery does not warrant or guarantee accuracy. Keith Machinery strongly recommends an inspection of the equipment prior to purchase. All equipment is sold "as is, where is, with all faults." After market services can be provided by Keith Machinery or it's affiliates at added costs.