...

GENERAL DISCUSSION Keith Machinery Corp. (KMC) sells and services more three roll mills (TRMs) than everyone else in North America, combined. As of January 1, 2020, KMC has more than...

ANSI B65 / NAPIM 177.1-2017The ANSI safety regulations (ANSI B65 / NAPIM 177.1) for three roll mills (TRMS) were extensively revised in 2007, and then reissued with some...

TRM FIELD SERVICES: KMC has servicemen available for field service throughout the world. These servicemen regularly do emergency repairs, routine annual maintenance trips, and mill disassembly/reassembly for Roll Set Jobs...

KMC INK MIXERS Designed to mix a viscous product with the incorporation of a minimum amount of air. Mixing is normally accomplished with the agitator moving slowly up and down...

New features include very quiet direct center roll drive, and sealed at the factory gearbox that does not require regular lubrication. Standard with chilled iron (water cooled) rolls, stainless steel...

Steel or Stainless Rolls Four Point Adjustment Quick Release Feature Hydraulic Pressure Units (Optional) Bronze or Teflon Endplates Water Cooled Rolls Roller Bearings Spiral Gears    Features: Rolls - The...

ANTHONY MKI PILOT THREE ROLL MILLS (TRMS) are the more basic ANTHONY TRMS (as compared to ANTHONY MKII models), and almost all of these MKI TRMS are shipped with manual...

All ANTHONY MKII THREE ROLL MILLS (TRMS) are MADE IN THE USA, and they are standard with electro-hydraulic roll set, electro-hydraulic apron set, stainless steel frame & apron, bi-metallic centrifugally...

Photo of remanufactured 6"x14" mill with manual roll set Photo of remanufactured Anthony 5"x12" mill with manual roll set 1-Used (remanufactured) Anthony Type (Anthony, Kent, Ross, etc.) 4"x8" Laboratory...

Photo of remanufactured Lehmann 16"x40" Large Production Mill with electrohydraulic roll set One (1) Used (remanufactured) Kent, Lehmann, Day or Ross Small, Mid or Large Production Three Roll Mill. Unit...

A Agitators B Blenders, Pre-Owned Ribbon Type Blenders, Pre-Owned Vee, Conical, Offset Blenders, New KMMC C Candy Cooking Equipment Cartridge Fill/Close Centrifuges Chilsonators/R. Compactor Coating Pans D Dispersers Dryers and...

Our website has been redesigned to better serve our clients.  We have thousands of machines in stock.  We are adding equipment daily to our online inventory.  Please...

Our website has been redesigned to better serve our clients.  We have thousands of machines in stock.  We are adding equipment daily to our online inventory.  Please...

Our website has been redesigned to better serve our clients.  We have thousands of machines in stock.  We are adding equipment daily to our online inventory.  Please...

Our website has been redesigned to better serve our clients.  We have thousands of machines in stock.  We are adding equipment daily to our online inventory.  Please...

Our website has been redesigned to better serve our clients.  We have thousands of machines in stock.  We are adding equipment daily to our online inventory.  Please...

Our website has been redesigned to better serve our clients.  We have thousands of machines in stock.  We are adding equipment daily to our online inventory.  Please...

Many of our clients often request our services to oversee and manage removal efforts for one reason…we can do what most common riggers can’t!  Sometimes riggers (although qualified to...

Keith Machinery Metals Corp. manufactures a line of powder mixing equipment, including "Vee" Blenders, Conical Blenders, "Offset" Cone Blenders, Paddle Blenders, & Ribbon Blenders. The KMMC designs conform to the...

316 SS Contact Parts Mild Steel Painted Support Stands. Stainless Steel optional. White Neoprene for Contact Gaskets Internal Finish: 30-35 Microinch, All Welds Ground Smooth & Flush(Higher Surface Finishes upon...

316 SS Contact Parts Mild Steel Painted Support Stands. Stainless Steel optional. White Neoprene for Contact Gaskets Internal Finish: 30-35 Microinch, All Welds Ground Smooth & Flush (Higher Surface Finishes...

316 SS Contact Parts Mild Steel Painted Support Stands. Stainless Steel optional. White Neoprene for Contact Gaskets Internal Finish: 30-35 Microinch, All Welds Ground Smooth & Flush (Higher Surface Finishes...

About Us Keith Machinery is widely recognized as a leading supplier of used and new equipment for the Pharmaceutical, Cosmetic, Food, Paint and Ink, Chemical, and related industries. Keith Machinery...

Corporate Headquarters 34 Gear Ave., Lindenhurst, NY 11757Tel: (631) 957-1200Fax: (631) 957-9264E-Mail: sales@keithmachinery....

Keith Machinery Corp. 34 Gear Avenue ·  Lindenhurst, NY 11757Email: sales@keithmachinery.comPhone: 631-957-1200 Fax: 631-957-9264   Directions   Airports:LaGuardia Airport (LGA)John F. Kennedy International Airport (JFK)Islip MacArthur...

1.    DEFINITIONS: As used herein, (a) "SELLER" shall mean Keith Machinery Corp. and Keith Machinery Metals Corp. and Anthony Manufacturing Corp. and Keith Machinery as agent for seller to...

Typical Construction Specifications     316 SS Contact Parts Internal Finish: 30-35 Microinch, All Welds Ground Smooth & Flush (Higher Surfaces Finishes Upon Request) Electropolishing can be offered on Interior...

KMC Liquid & Cream Fillers Keith Machinery Corp. (KMC) manufactures a complete line of filling equipment for both waterlike and viscous products. All fillers are designed for ease of operation...

KMC Rotary Unscrambler   The Rotary Unscrambler is designed to feed round containers of any type, size and material. The containers are generally fed from cartons onto the unloading table....

  Changeover time 4-5 minutes. Provides extremely accurate fill volumes which eliminates costly product giveaway. The unit can be set up for single cycle or continuous operation. Approximate speed of...

  Changeover time 4-5 minutes. Provides extremely accurate fill volumes which eliminates costly product giveaway. The unit can be set up for single cycle or continuous operation. Approximate speed of...

  1 ounce to 70 ounce piston sets. Available in 2, 4, 6, 8, and 10 piston design. All Triclamp fittings for easy disassembly and clean up. Piston cylinders are...

Keith Machinery (KMC) manufactures new three roll mills (TRMs) under the ANTHONY brand name.  These TRMs are manufactured here at our Lindenhurst, NY facility (made in the USA!). ...

The typical format of a Fortune 500 surplus asset recovery model can be summarized as follows   Case Studies Chiron Betaseron Plant, Canóvanas, Puerto Rico Bristol-Myers Squibb – Garden City,...

Keith Machinery offers many tailored financial solutions to meet our clients’ needs. Keith Machinery offers 24-72 month payment plans, with a variety of buy-out options. Should you wish to explore...

316 SS Contact Parts Mild Steel Painted Support Stands. Stainless Steel optional. White Neoprene for Contact Gaskets Internal Finish: 30-35 Microinch, All Welds Ground Smooth & Flush (Higher Surface Finishes...

316 SS Contact Parts Mild Steel Painted Support Stands. Stainless Steel optional. White Neoprene for Contact Gaskets Internal Finish: 30-35 Microinch, All Welds Ground Smooth & Flush(Higher Surface Finishes upon...

316 SS Contact Parts Mild Steel Painted Support Stands. Stainless Steel optional. White Neoprene for Contact Gaskets Internal Finish: 30-35 Microinch, All Welds Ground Smooth & Flush(Higher Surface Finishes upon...

316 SS Contact Parts White Neoprene for Conatct Gaskets Internal Finish: 30-35 Microinch, All Welds Ground Smooth & Flush (Higher Surface Finishes upon request) External Finish: Buff Tri-Clamp discharge valve...

KMMC 36 cubic foot Ribbon Blender   316 SS Contact Parts Mild Steel Painted Support Stands. Stainless Steel optional. White Neoprene for Contact GasketsInternal Finish: 30-35 Microinch, All Welds Ground...

Keith Machinery Corporation (KMC), of Lindenhurst, New York, is the largest three-roll mill (TRM) rebuilding facility in the country. The company occupies more than 100,000 square feet of shop and...

The description as to what is included in our RSJ is given below (Items #1 to #14).  Please inquire for pricing. 1) The roll set is brought into our...

USED THREE ROLL MILLS IN STOCK (READY FOR REMANUFACTURE) AS OF MAY 2019 LAB & PILOT THREE ROLL MILLS (33) ANTHONY, KENT, & ROSS 4”X8” THREE ROLL MILLS (6) ROSS...

Keith Machinery (KMC) remanufactures all makes and sizes of Three Roll Mills (TRMs).  With this program, the mill is shipped into the KMC shop for work & a remanufacture...

ENDPLATE SYSTEMSThere are three (3) types of endplate systems employed on TRMS, and for the purposes of this discussion, I will call these KENT style endplates, or DAY style endplates,...

ANSI 2017 ELECTRICAL PACKAGE FOR FIELD INSTALLATION (PRODUCTION TRMS)The KMC fully ANSI 2017 compliant electrical package includes a main electrical box, a primary control station, a secondary control station, two...